GE C70 Instruction Manual page 251
Capacitor bank protection
and control system
Hide thumbs
Also See for C70:
- Instruction manual (708 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (702 pages)
Table of Contents
Advertisement
CHAPTER 5: SETTINGS
File transfer by IEC 61850
The C70 supports file transfer by IEC 61850. The approach is as follows, using the SISCO AX-S4 61850 client software as an
example.
1.
In the AX-S4 61850 Explorer window, click the Tools menu and access the SISCO File Transfer Utility.
2.
Select the Remote AR Name from the drop-down list. Available files appear in the File Specification area on the right
side of the window.
3.
With the Copy option active, select a file to transfer and click the Go button. The file is copied and displays in the Local
list on the left side of the window.
4.
Repeat the process to transfer any other files.
5.3.4.13 Web server HTTP protocol
SETTINGS PRODUCT SETUP COMMUNICATIONS WEB SERVER HTTP PROTOCOL
WEB SERVER
HTTP PROTOCOL
The C70 contains an embedded web server and can display pages in a web browser. The web pages are organized as a
series of menus that can be accessed starting at the C70 "Main Menu." Web pages are read-only and are available
showing DNP and IEC 60870-5-104 points lists, Modbus registers, event records, fault reports, and so on. First connect the
C70 and a computer to an Ethernet network, then enter the IP address of the C70 Ethernet port in a web browser.
To close the port, set the port number to 0. The change takes effect when the C70 is restarted.
C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL
Figure 5-39: File transfer by IEC 61850
HTTP TCP PORT
NUMBER(80): 80
Range: 0 to 65535 in steps of 1
PRODUCT SETUP
5
5-85
Advertisement
Table of Contents
