Changing Paper Settings - Canon TR7500 Series Online Manual

Changing Paper Settings

This printer prints received faxes to paper loaded in the printer beforehand. You can use the operation panel
to change the paper settings for printing faxes. Make sure that the settings are appropriate for the loaded
paper.
Important
• If the size of loaded paper is different from that specified in the paper size setting, the received faxes
are stored in the printer's memory and Check the page size and tap [OK]. is displayed on the touch
screen. In this case, load the same size of paper as that specified in the paper size setting, and then
select OK.
You can also press the Stop button to close the message and print the stored documents in the
printer's memory later.
Printing Document in Printer's Memory
• If no paper is loaded, or paper has run out while printing is in progress, the received faxes are stored in
the printer's memory and the error message for no paper is displayed on the touch screen. In this case,
load paper and select OK.
You can also press the Stop button to close the message and print the stored documents in the
printer's memory later.
Printing Document in Printer's Memory
Note
• If the sender sends a document that is larger than Letter-size or Legal-size, such as 11 x 17 inches, the
sender's device may send the fax automatically reduced in size or divided, or send only a part of the
original.
1. Make sure that printer is turned on.
2. Select FAX on the HOME screen.
Using the Operation Panel
The Fax standby screen is displayed.
3. Select Function list.
The Function list screen is displayed.
4. Select FAX paper settings.
The FAX paper settings screen is displayed.
5. Specify settings.
421