Battery Operation (Standard); Mains Connection (Option); Initial Commissioning - KERN EMB-S 200-1S Operating Instructions Manual

5.6 Battery operation (Standard)

Remove battery cover on the underside of the weighing pan. Insert 2 x 1.5 V
batteries. Reinsert the battery cover.
In order to save the battery, the balance switches automatically off after 3 minutes
without weighing.
If the batteries are run down, "LO" appears in the display. Press button and
replace the batteries immediately.
If the balance is not used for a longer time, take out the batteries and store them
separately. Leaking battery liquid could damage the balance.

5.7 Mains connection (option)

Power supply is provided by the external power supply unit KERN YKA-03 (optional).
The stated voltage value must be the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.

5.8 Initial Commissioning

A warming up time of 3 minutes after switching on stabilizes the measuring values.
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter "Adjustment".
EMB-S-BA-e-1612 9