Page 1
KIRK System 500 2G4 Technical Guide 14090000 Version 2...
Page 2
Polycom, Inc. Information contained herein is subject to change without notice and does not represent commitment of any type on the part of Polycom, Inc. Polycom and Accord are registered trademarks of Polycom, Inc.
Contents How to Register a Master Handset How to Register a Repeater Regulatory Information Registering Additional Handsets via Master Handset ... . 1–2 How to Delete a Registered Handset ......1–3 How to Register a Repeater to the System .
How to Register a Master Handset When turning on the KIRK System 500 2G4, it will automatically go into registration mode for a period of 15 min. In this period you can register the MASTER handset. (it’s only possible to login 1 MASTER on each system. The first handset is automatically the MASTER handset).
KIRK System 500 2G4 - Technical Guide, 14090000 Version 2 • • • • • • The Serial Number of the MASTER handset will now show in the display. Press the ✓key. Right after this has been done, the handset will ask for an extension number.
How to Register a Master Handset Right after this has been done, the handset will ask for an extension number. Simply enter the extension number. Then press the ✓key (can be the ”old” extension number used on the corded phone. Or alternatively any number available in the PABX).
Page 7
KIRK System 500 2G4 - Technical Guide, 14090000 Version 2 1–4...
As indicated by the name, it adds a larger area to the already existing coverage area. Note In general terms, KIRK System 500 2G4 contains 6 available speech channels in the coverage area of the base station. There are 2 simultaneous speech channels in the coverage area of each Repeater.
Kirk System 500 2G4 - Technical Guide - 14090000 Version 2 How to Establish Repeater Jumps (Repeaters in a Chain) The repeater furthest from the base station cannot ”see” the system – it is therefore necessary to establish a connection to the basestation through the repeater which is closest.
Regulatory Information Important Safety Instructions and Product Information Before using your telephone equipment, you should always follow basic safety instruction to reduce the risk of fire, electrical shock and injury to persons, and damage to property. 10 Refer servicing to qualified service personnel under the following Read and understand all instructions Follow all warnings and instructions including those marked on the product...
Page 11
KIRK System 500 2G4 - Technical Guide, 14090000 Version 2 11 Avoid using telephone during an electrical storm. There may be a risk of 12 Do not use the telephone to report a gas leak in the vicinity of the leak...
Page 12
NOTICES NOTICE: Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
Page 13
KIRK System 500 2G4 - Technical Guide, 14090000 Version 2 Power Outage: In the event of a power outage, your cordless telephone will not operate. The cordless telephone requires electricity for operation. You should have a telephone which does not require electricity available for use during power outages.
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSOR IMPLIED. ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. WE DISCLAIM ANY LIABILITY FOR DAMAGES FOR LOSS OF USE OF THE PRODUCTS, LOSS OF TIME, INCONVENIENCE, INJURY TO ANY PERSON, OR DAMAGE TO PROPERTY CAUSED BY THE PRODUCT, LOSS...
Need help?
Do you have a question about the KIRK 500 2G4 and is the answer not in the manual?
Questions and answers