Download  Print this page

Advertisement

2.
Measure the radio signal strength by moving to and away from the CS.
a.
Move to the CS until the point the radio signal strength level becomes "12".
b.
Move away from the CS and identify the CS coverage area within which the radio
signal strength level is greater than "8". Draw the area on the map.
c.
Move away from the CS and identify the CS coverage area within which the radio
signal strength level is greater than "3". Draw the area on the map.
3.
Repeat the steps 1 and 2 for other CSs, and relocate the CSs when necessary.
a.
Overlap adjacent CS coverage areas where the radio signal strength level is "8" by 5
m to 10 m.
Channel no. 0
PS
Channel no. 0
Radio Signal Strength Levels
Level: 00
Level: 01 to 02
Level: 03 to 07
Level: 08 to 10
Level: 11 to 12
5 m to 10 m
2.8 Connection of DECT Portable Stations
CH0
L:12
CH0
PS
L:08
PS
Out of range
Catches noise easily or disconnects
May catch noise
Good
Better
Channel no. 1
CH0
L:03
Installation Manual
131

Advertisement

Table of Contents

This manual is also suitable for:

Kx-tda200

Comments to this Manuals

Symbols: 0
Latest comments: