Samsung HW-K950 User Manual page 13

CONNECTING DEVICES IN ORDER TO USE DOLBY ATMOS®
This product supports Dolby Atmos®.
c Important: Dolby Atmos® works only in HDMI mode. It is not compatible with other input sources.
External
Device
1. Connect an HDMI cable from the HDMI IN 1 or HDMI IN 2 jack on the back of the product to the HDMI OUT
jack on your digital device. Use the HDMI cable to connect the HDMI IN port on the TV to the HDMI OUT
(TV-ARC) port on the bottom of the Soundbar.
2. Press the button on the right side of the Soundbar or the SOURCE button on the remote control to
select HDMI1 or HDMI2.
3. The selected HDMI mode is displayed on the Soundbar display panel and sound plays.
c When Dolby Atmos® operated, the Blue LED on the right edge of the Soundbar will turn on and glow.
4. Configuring Dolby Atmos® on your BD player, or other device.
• Check the audio output options using the settings menu on your BD player, or other device.
• Make sure that "No Encoding" is selected for bitstream in the audio output options.
e.g., On a Samsung Player: Home menu  Settings  Sound 
Digital Output: Select Bitstream (Unprocessed).
• If the Audio Output options include Secondary Audio, make sure it is set to Off.
c Dolby Atmos® works only on 5.1.4 channels.
c Make sure that the content supports Dolby Atmos®.
HDMI IN
Soundbar
HDMI OUT
Settings
Sound
Speaker Settings
PCM
Digital Output
Bitstream (Unprocessed)
PCM Downsampling
Dynamic Range Control Bitstream (Re-encoded DTS)
Downmixing Mode
Bitstream (Re-encoded Dolby D)
DTS Neo:6 Mode
Audio Sync
· 13 · English
HDMI Cable
Or
HDMI Cable
Off
0 ms
Bottom of the
Soundbar
HDMI OUT
(TV-ARC)
HDMI IN 1
HDMI IN 2