Polk Audio PSW303 Owner's Manual page 7

18" - 24"
Figure 1
(46cm - 61cm)
6" (15cm)
Figure 4
Figure 5
USING BINDING POST CONNECTIONS
BORNES DE BRANCHEMENT
Loosen hex nut
Insert speaker wire
Desserrez l'écrou de la
through hole
borne et insérez le fil
dénudé dans le trou.
Tighten hex nut
Do not insert insulated section of speaker wire
Resserrez fermement
N'insérez pas la gaine du fil dans le trou car
l'écrou pour assurer un
le contact électrique ne se fera pas.
bon contact.
To use Banana Plugs (US only):
Unscrew the binding post lug nuts completely
to expose the binding post plugs (plastic plugs inserted
into the binding posts). Carefully pry out the binding
post plugs to expose banana plug holes. Screw the lug
nuts back on the binding posts and insert banana plugs.
(This is for US owners only.)
Figure 2
OK
Figure 6
RECOMMENDED
HOOKUP
RACCORDEMENT
RECOMMANDÉ
For accessories and information visit www.polkaudio.com
Figure 3
AMPLIFIER
LINE IN
(FILTERED)
L
LFE IN
R
(UNFILTERED)
– –
+ LEFT – – RIGHT +
SUBWOOFER
7