Download  Print this page


Telemetry Mode Use

Telemetry Mode Use
To minimize patient disruption, the MX40 operates in Telemetry Mode
when connected to the Information Center. In Telemetry Mode, the local
volume is set to zero and the display is off. You can activate the display at
any time by touching the Main Screen button for two seconds. All active
alarms can be viewed when the display is on, however audible alarm
indicators are not annunciated. Regardless of the display status, all
measurement data is being sent to the Information Center. Telemetry Mode
is only available when connected to the Information Center.
Basic Operation


Table of Contents

   Also See for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: