Download  Print this page

Advertisement

Battery Information
 Insert AA batteries into the MX40 using the following
4-18
Basic Operation
3
Close the battery compartment door.
4
Watch for the start-up screen on the front of the MX40 to illuminate
briefly.
procedure:
1
Open the battery compartment by lifting up on both bottom sides of the
compartment door.
2
Insert the AA battery tray if not already present.
3
Insert three AA 1.5V Alkaline batteries, matching the polarity with the +
indications inside the compartment.
Note—all batteries are inserted with the + polarity in the same direction.
Use of AA batteries is not supported with the WLAN MX40 (Model
Number 865352). Use only the rechargeable lithium-ion battery.

Advertisement

Table of Contents

   Also See for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: