Download  Print this page

Advertisement

Alarms Area

SmartKey
Function
Standby
Puts the device into Standby locally and
at the Information Center. Displays
purchased/enabled product options. To
resume from Standby, touch the Main
Screen button.
Add/Remove
Displays available monitors and IntelliVue
Cableless Measurements to assign to via
the short-range radio.
Print Reports
Prints the pre-configured report as
designated at the Information Center.
Vitals Trends
View up to 24 hours of tabular trend data.
One hour standard. 24 hours optional.
Setup Screen
Determines time period that the display
remains active after user interaction or
whether the display is always On or
always Off.
Lock/Unlock
Locks/Unlocks the display.
Op Mode
Selects either Monitoring, Demo, Config
or Service modes.
The Alarm Area of the MX40 displays
physiological alarms and technical alarms.
A multiple alarm indicator (down arrow) is
displayed when multiple alarm conditions are
present and the alarm message rotates every 3
seconds.
A check mark in front of the alarm text signifies
that the alarm has been acknowledged by
touching the Silence Alarms button.
Alarm Indicators display in the Patient Information
Area in place of the time clock when alarm/INOP
conditions are present but have not been
acknowledged.
Touching the Alarms Area displays a list of all
active alarms.
The alarms paused icon communicates whether
the alarm system is on/off.
Local Alarm Audio is off when the alarm volume
symbol
is present next to the time..
Controls, Indicators and Connectors
Basic Operation
4-5

Advertisement

Table of Contents

   Also See for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: