Controls, Indicators and Connectors
Main Screen Button
The following table lists the SmartKeys available on the display of the
Note—gray text on a SmartKey signifies that the item is unavailable.
Activates the Touch Display if touched for two
Cycles through the display screens if touched
Resumes from Standby.
When pressed from a sub-menu, returns display to the
Starts a manual SpO
Starts a delayed recording at the
Alarm Volume setting. Review of up to 50
previous alarm conditions (entries are
stored during power cycle). Pause Alarms
for configured time period (if enabled at
the Information Center).
Mode: Telemetry /
Toggles between modes. In Telemetry
Mode, display and audio are off; in
Monitor Mode, display and audio are