Download  Print this page

Advertisement

Electromagnetic Compatibility
Frequency of
Transmitter
Equation
Rated max. output
power of transmitter
0.01 W
0.1 W
1 W
10 W
100 W
15-12 Safety Standards & Specifications
Field strengths from fixed transmitters, such as base stations for radio
(cellular, cordless) telephones and land mobile radios, amateur radio, AM
and FM radio broadcast and TV broadcast cannot be predicted theoretically
with accuracy. To assess the electromagnetic environment due to fixed RF
transmitters, an electromagnetic site survey should be considered. If the
measured field strength in the location in which the monitor is used
exceeds the applicable RF compliance level above, the MX40 should be
observed to verify normal operation. If abnormal performance is observed,
additional measures may be necessary, such as reorienting or relocating the
monitor.
These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects, and people.
The MX40 is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or user of the
monitor can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications
equipment and the monitor as recommended below, according to the
maximum output power of the communications equipment.
In the following table, P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer and d is
the recommended separation distance in meters (m).
150 kHz to 80 MHz
d = 1.2√P
Separation distance
0.1 m
0.4 m
1.2 m
3.8 m
12.0 m
80 MHz to 800 MHz
d = 1.2√P
Separation distance
0.1 m
0.4 m
1.3 m
3.8 m
12.0 m
800 MHz to 2.5 GHz
d = 2.3√P
Separation distance
0.2 m
0.7 m
2.3 m
7.3 m
23.0 m

Advertisement

Table of Contents

   Also See for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: