10 Wait for the new_device label to change to the selected equipment label.
11 In Sector Setup, select the Bed Label and Equipment Label and then
Re-assigning an Equipment Label at the IntelliVue
Information Center iX
To re-assign an equipment label to a replacement
Enter the Manage Unit application (scroll down if necessary).
Select Label Assignment.
Select the entry for both the previously assigned device (on the left) and
the entry for the available device (on the right).
At the MX40, select Confirm.
At the Information Center iX, select OK.
Select Refresh to confirm that the device now appears in the Assigned
Confirm that the Equipment Label is now displayed on the MX40.
Label Assignment for Replacement MX40