Download  Print this page

Advertisement

Unit Settings - Telemetry Setup
Control
Function
Enable/disable RF
RF Auto
operation during an
Shutoff
extended situation of all
leads off for more than 10
minutes and the SpO
not being measured
continuously.
Enable/disable the
Autopair
autopairing of the MX40
and the IntelliVue Patient
Monitor at the Information
Center.
Enable/disable the use of
Enable
IntelliVue Cableless
Cableless
Measurements for SpO
Measurements
and NBP
Reduce the delay time
SRR Fast
when fast switching
Transition
between the MX40 and
the patient monitor.
Sets the appearance of
Fixed Pacer
the pacer spikes at the
Amplitude
Information Center to a
fixed size as they appear
in the patient window.
Enable/disable the SpO
Enable SpO
2
measurement at the
Information Center.
Settings
enable
disable
is
2
enable
disable
enable
disable
2
enable
disable
enable
disable
enable
2
disable
Monitoring with the MX40 at the Information Center
Unit Configurable Settings
Factory
Default
enable (MX40
will shut off after
10 minutes of
Leads Off
condition and
SpO
is not
2
being measured
continuously.
Reconnect the
patient cable to
resume
monitoring.)
enable
disable
enable
disable
enable
11-15

Advertisement

Table of Contents

   Also See for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: