Download  Print this page

Mx40 Controls In The Patient Window (iic Ix) - Philips IntelliVue MX40 Instructions For Use Manual

Hide thumbs

Advertisement

MX40 Controls in the Patient Window (IIC iX)

The Patient Window at the Information Center iX includes controls for a
number of MX40 operations. For detailed instructions on these operations,
see the IntelliVue Information Center iX Instructions for Use or the Online Help.
 To View ECG, Resp, NBP or SpO
1
Click on the HR or SpO
current high and low alarm limits.
 To Change ECG, Resp, NBP or SpO
1
Click on the HR or SpO
2
Click on High Limit or Low Limit and select the new value from the list.
 To Change Paced Status
1
Click on the HR label in the Patient Window.
2
Click on Paced Mode.
3
Click on Off or On to select the status.
Warning
At admission/discharge, always check that paced status is correct for the
patient.
 To Change ECG Waveform Size
1
Click on the appropriate waveform.
2
Select Size Up or Size Down.
 To Select Lead
1
Click the appropriate waveform.
2
Select the desired lead label from the list.
Important — Do not set the primary and secondary channels to the same
lead.
 To Change Va and Vb Default Lead Settings (6-lead
only)
1
Click the Measurements Application button.
MX40 Controls in the Patient Window (IIC iX)
2
label in the Patient Window to display the
2
label in the Patient Window.
2
Monitoring with the MX40 at the Information Center
Alarm Limits
Alarm Limits
2
11-5

Advertisement

Table of Contents

   Also See for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: