Download  Print this page

Advertisement

Displaying Resp on the MX40

 To display the Resp waveform and/or numeric:
1
At the IntelliVue Information Center iX, select the Measurements
button from the Main Window.
2
From the Measurements Window, select Resp.
3
Click the I/O Resp button to toggle on or off as appropriate.
4
At the MX40, select a waveform area to display the Resp waveform.
5
The Change Wave menu is displayed.
6
From the Change Wave menu, select Resp.
7
Select any measurement numeric to change to display the Resp
numeric.
8
Select Change Numeric (it may be necessary to scroll down).
Note — The Change Wave menu is also used to adjust the Resp waveform
size at the MX40 and at the IntelliVue Information Center iX.)
9
From the Change Numeric menu, select Resp.
Displaying Resp on the MX40
Monitoring Respiration Rate (Resp)
8-5

Advertisement

Table of Contents

   Also See for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: