Table of Contents
Advertisement
C.Select the item 1—Video Signal Test and press "Enter" to start the test on any
color difference in Color bar and the standard fineness of the RＧＢ, then press "Top
Menu" back to test menu
STEP2:
A.Select item 2—Speaker & Sound Signal Test and press "Enter" for the item
1--Speaker & Sound Signal Test, then press "Enter" for "2.0CH" and the "1KHZ Audio
Test", to test the R/L- C's output is normally good or not. And then press "Top Menu"
back to menu
B.In the menu to choose item 4--Video Demo and press "Enter" to start the test, to
check the normally good video and audio output , then press "Top Menu" back to
test menu.
STEP3:
Take out the test disc and the test is over.
3-5
Advertisement
Table of Contents
