Connecting The Computer; Charging Your Acer N30 - Acer n30 Manual

1 Getting started
Preparing to use your Acer n30
8

Connecting the computer

The 3-in-one sync cable that comes with your handheld enables you to synchronise the
information on your handheld with the data in your computer using ActiveSync
technology.
NOTE:
Don't plug the USB host into USB client.
To connect the computer
Plug the 3-in-one sync cable into the 26-pin I/O connector on the bottom of your
handheld and plug the USB client connector into an available USB port on your
.
computer

Charging your Acer n30

For initial use, you need to charge your handheld for three hours. After that, you can
charge it for a few minutes each day to recharge the battery to full capacity. Normally,