Download  Print this page

Advertisement

Brakes

Brake Wear Inspection
Inspect the brakes for wear. For each
front and rear disc brake caliper, if the
thickness of either pad is less than 1
mm (0.04 in.), replace both pads in the
caliper as a set. Pad replacement
should be done by an authorized Ka-
wasaki dealer.
A. Lining Thickness
B. 1 mm (0.04 in.)
MAINTENANCE AND ADJUSTMENT
Brake Fluid -
In accordance with the Periodic
Maintenance Chart, inspect the brake
fluid level in both the front and rear
brake fluid reservoirs and change the
brake fluid. The brake fluid should also
be changed if it becomes contami-
nated with dirt or water.
Fluid Requirement
Use heavy-duty brake fluid only from
a container marked DOT4.
NOTICE
Do not spill brake fluid onto any
painted surface.
Do not use fluid from a container
that has been left open or that
has been unsealed for a long
time.
Check for fluid leakage around
the fittings.
Check brake hose for damage.
123

Advertisement

Table of Contents

   Also See for Kawasaki ER-6n

This manual is also suitable for:

Er-6n abs

Comments to this Manuals

Symbols: 0
Latest comments: