Using Interactive Touch (Only For S560T); System Requirements - Dell S560P User Manual

3
The S560T projector projects the connected computer's desktop image onto
the whiteboard and it acts as input device to the computer. You can navigate,
select, and interact with your computer programs from the whiteboard.
The S560T projector is a 10-pt multi-touch interactive projector. To setup the
interactive function, install the touch unit as described in the 'Touch setup
guide'. Also, use the Dell S560x Interactive utility for first-time setup and
calibration which can be found in CD & download from Dell Support.

System Requirements

NOTE:
You computer must have the following minimum system
requirements::
Operating Number of touch
System points supported
Windows 10 touch points
7/8/10
MAC OS X 1 touch point
(10.7~10.11)
ChromeBook 10 touch points
*1 : Get S560x Interactive Utility from provided CD or download it from Dell
Support
*2 : S560T requires first-time alignment and calibration, ensure you complete
setup process before use
*3 : NET Framework 4.0 installation is required
24

Using Interactive Touch (Only for S560T)

Using Interactive Touch (Only
for S560T)
*4
Installation of S560x Interactive Utility
For first-time setup
*3
Supported
Supported
Not supported,
please use a
Windows OS or Mac
OS computer to
complete first-time
setup for the S560T
*1
For subsequent use
Not required
Required, please
install the setup
utility on all Mac OS
computers, to use
them with the S560T
Not required