Pen Calibration - Dell S560P User Manual

Pen Calibration

Switch to display mode "Projector only".
1
Perform touch calibration on S560P using the S560x interactive utility
2
(Win, Mac).
Select auto-calibration while running the S560X interactive utility.
3
NOTE:
If the fail message pops up, follow below steps to trouble-
shoot and do Auto Calibration again.
•Close all software applications
•Reduce ambient light
•Do not obstruct or shake lens during calibration
•Check if projected image is clear, if not, adjust focus to sharpen the
image
If auto-calibration fails, setup using 'manual calibration'.
Select Manual Calibration, and follow the steps for calibration. Manual
4
Calibration is suggested to get a better accuracy.
Using Interactive Pen (Only for S560P) 23