Attaching Carbon Brush - Makita 9566C Technical Information

R
epair
< 6 > Attaching carbon brush
Connect the receptacle of carbon brush with the terminal of brush holder
by pushing in the direction of the arrow, as illustrated in Fig. 5.
Receptacle of carbon brush
Terminal of
brush holder
Push the receptacle of carbon brush until it stops as illustrated in Fig. 4A.
Completely attached receptacle
of carbon brush
Incompletely attached receptacle
of carbon brush
Carbon brush
Brush holder
Fig. 5
Fig. 5A
Fig. 5B
P 8 / 10