BASIC MODEL ADVANCED MODEL TruLink Remote allows for easy and discreet ® 1. Ear Selection Switch Advanced Model Only adjustments to your hearing instruments. 6. Mute/Unmute 2. Volume Up With its long-life battery, your TruLink Remote 7. Memory Change 3. Volume Down is always ready to work with your hearing 8.
Page 3
Pairing Process 3. Press and hold the HOME For TruLink Remote to interact with your hearing button for 5 seconds instrument(s), you must first pair the Remote with each hearing instrument. You only need to 4. After 5 seconds, both LEDs pair TruLink Remote with a hearing instrument start rapidly blinking one time, as they should automatically...
Left Both Right Volume Up/Down Ear Selection Switch Each time you activate a Volume button, the The Ear Selection Switch controls whether overall level of all sounds coming through your adjustments are made to a single hearing hearing instrument changes in the requested instrument or both hearing instruments.
ADVANCED MODEL ONLY ADVANCED MODEL ONLY Mute/Unmute Favorite To temporarily turn off all sounds presented in Your hearing instruments have the following the hearing instruments, press the Mute/Unmute Favorite button configuration: button. To unmute the hearing instruments, – Pressing this button has no effect ...
2. Thread lanyard through loop and pull lanyard. Instructions for Disposal of Old Electronics Lanyards can be obtained from your hearing Paradigm encourages, and your local community laws may professional (ask for part #90974-000). require, that your TruLink Remote be disposed of via your local electronics recycling/disposal process.
Page 7
TruLink Remote is classified as a Type B applied part under The TruLink Remote is designed to the following the IEC 60601-1 medical instrument standard. temperature ranges: TruLink Remote is designed to comply with the most • Operating: -20 to +60 degrees C (-4 to 140 F), stringent Standards of International Electromagnetic humidity <...
Page 8
WIRELESS TECHNICAL DESCRIPTION FCC/IC Information The TruLink Remote operates in the 2.4-2.4835 GHz band with a maximum effected radiated power of 3 FCC ID: EOA-24WR dBm with transmission modulation type of 1M06F1W. The IC: 6903A-24WR receiver section of the radio has a bandwidth of 2 MHz. (Model 600) The TruLink Remote has been tested to, and has passed, the following emissions and immunity tests:...
Page 9
The TruLink Remote operates in the 2.4 - 2.4835 GHz band with a maximum effective radiated power of 3 dBm. Hereby, Paradigm declares that the TruLink Remote is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from the addresses below.
Need help?
Do you have a question about the TruLink BKLT2868-01-EE-XX and is the answer not in the manual?
Questions and answers