Bosch GOP Professional 30-28 Original Instructions Manual page 5

Multi-cutter
Hide thumbs Also See for GOP Professional 30-28:
Table of Contents

Advertisement

OBJ_BUCH-2566-002.book Page 19 Friday, June 17, 2016 1:16 PM
Selecting the Application Tool/Accessory
Accessory
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in the extensive Bosch acces-
sories program.
Accessory
BIM segment saw
blade
Base plate for sand-
ing, series Delta
93 mm
Profile sander
BIM plunge cut saw
blade, wood and
metal
HCS plunge cut saw
blade, wood
Bi-metal plunge cut
saw blade, hard-
wood
Bosch Power Tools
GOP 30-28
GOP 55-36
GOP 40-30
Material
Application
Wooden materials,
Separating and plunge cuts; also for sawing close to edges,
Plastic,
in corners and hard to reach areas;
Non-ferrous metals
example: shortening already installed bottom rails or door
hinges, plunge cuts for adjusting floor panels
Depends on sanding sheet Sanding surfaces close to edges, in corners or hard to reach
areas;
depending on the sanding sheet for, e.g., sanding wood,
paint, varnish, stone
Fleeces for cleaning and for texturing wood, removing rust
from metal and for keying varnishes, polishing felt for pre-
polishing
Wood,
Convenient, efficient sanding of profiles up to a diameter of
Pipes/Profile,
55 mm;
Paint,
Red sanding sheets for sanding wood, pipes/profiles,
Varnishes,
varnishes, fillers and metal
Filler,
Metal
Softwood,
Smaller separating and plunge cuts;
Soft plastics,
example: cutting an opening for sockets, flush cutting a
Plasterboard,
copper pipe, plunge cuts in plasterboard
Thin-walled aluminium
Filigree adjustment work in wood;
and non-ferrous metal
example: sawing openings for locks and fittings
profiles,
Thin sheet metals,
Non-hardened nails and
screws
Wooden materials,
Separating and deep plunge cuts; also for sawing close to
Soft plastics
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
Hardwood,
Plunge cuts in laminated panels or hardwood;
Laminated panels
example: installing skylights
English | 19
1 609 92A 33B | (17.6.16)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gop professional 40-30Gop professional 55-36

Table of Contents