Nke-1066 Scanner(1.5Feet) - JRC JMA-1032 Instruction Manual

1-4-1 NKE-1066 SCANNER(1.5FEET)

Set the cable inlet side to stern.
(Any direction is possible to install and possible to initial setup.
, but it is better selection to select the cable length must be minimize along the mast.)
bow
Ship's heading
1 Open radome
Using box spanner tool, lift up the radome.
Loose screw
Loose screw
Loose screw
Fig. 1-4-1-1
Fig. 1-4-1-1
Fig. 1-4-1-2
Chapter 1 INSTALLATION
stern
HORN ANNTENA
(1.5FT)
Loose screw
CABLE INLET
ル挿入口
21