Walgreens WGNBPW-930BT Manual page 10

Note:
• Once the date and time have been successfully synced,
future readings will automatically have the correct date
and time.
• If you are having trouble automatically syncing the date
and time, make sure Bluetooth is ON on your device and
ON on the blood pressure monitor.
To set manually:
1. To set the date and time, press the
DATE/TIME SET button
2. The display will show a blinking number showing the
MONTH. Change the MONTH by pressing the + button.
Each press will increase the number by one in a cycling
manner. Press the DATE/TIME SET button
confirm the entry, and the screen will show a blinking
number representing the DAY.
3. Change the DAY,
YEAR, HOUR, &
MINUTE as described
in Step 2 above,
using the + button to
change the numbers
and the DATE/TIME
SET button to
confirm the entries.
.
again to
Press the button
blinking MONTH
increasing MONTH
confirm the entry
repeat process to set DAY,
YEAR, HOUR, and MINUTE
17
Note:
• The date and time will only need to be set manually if
the monitor will not be used with the Walgreens
Connect App.
• If the Walgreens Connect App is used after manually
setting the date and time on the blood pressure monitor,
the date and time on the mobile device will override the
date and time on the blood pressure monitor.
18