Drive Chain - Polaris Scrambler 500 4x4 Owner's Manual

MAINTENANCE AND LUBRICATION
Lubrication Recommendations

Drive Chain

Polaris ATV drive chains are equipped with o-ring-sealed, permanently
greased pins and rollers. However, the outer surfaces of the roller must
be lubricated.
Always inspect the drive chain prior to operating the vehicle. Check for
damaged or missing o-rings or damaged rollers. Also check for correct
slack adjustment. Maintain the stone guard to rear sprocket clearance
at 1/8" (.3 cm).
Regularly lubricate the drive chain with Polaris Chain Lube, an SAE
80-90 lube or an approved o-ring chain spray lube. See page 117 for the
part numbers of Polaris products.
Washing the drive chain with a high pressure washer or gasoline
can cause damage to the o-rings, causing premature wear and
drive chain failure. Do not use a high pressure washer or
gasoline to clean the drive chain.
84
CAUTION