Preface - Siemens SIMATIC 505 User Manual

Other Manuals
Agency Approvals
Telephoning for
Assistance
SIMATIC 505 Interrupt Input Module User Manual
This manual provides the information needed to install, wire, and configure
the following SIMATICr 505 Isolated Interrupt Discrete Input Modules:
PPX:505–4317
PPX:505–4318
PPX:505–4319
Except for their input voltage differences, these modules function
identically.
Refer to the manuals listed below for instructions on installing,
programming, and troubleshooting your controller and I/O. The x in the
order number refers to the latest edition.
SIMATIC 505 Programming Reference Manual (PPX:505–8104–x)
SIMATICr 525/535 Hardware/Installation Manual
(PPX:505–8103–x)
SIMATICr 545 System Manual (PPX:545–8101–x)
SIMATICr 555 System Manual (PPX:555–8101–x)
SIMATICr 560T/565T System Manual (PPX:560/565–8109–x)
SIMATICr 545/555 System Manual (PPX:545/555–8101–x)
The user manual for your release of TISOFT
The Interrupt Input Modules meet the standards of the following agencies:
Underwriters Laboratoriesr: UL Listed (Industrial Control Equipment)
Canadian Standards Association: CSA Certified (Process Control
Equipment)
Factory Mutual Approved; Class I, Div. 2 Hazardous Locations
Verband Deutscher Elektrotechniker (VDE) 0160 Clearance/Creepage
for Electrical Equipment (Self-Compliance)
Series 505 products have been developed with consideration of the draft
standard of the International Electrotechnical Commission Committee
proposed standard (IEC-65A/WG6) for programmable controllers (released
as IEC 1131–2, Programmable Controllers Part 2: Equipment Requirements
and Tests, First Edition, 1992–09). Contact Siemens Industrial Automation,
Inc., for a listing of the standards to which Series 505 complies.
For technical assistance, contact your Siemens Industrial Automation, Inc.
distributor or sales office. If you need assistance in contacting your U.S.
distributor or sales office, call 1–800–964–4114.
24 VDC
48 VDC
125 VDC

Preface

Preface vii