Samsung SCS-26UC2 User Manual page 27

Trouble
The GPS LED still does not light up
blue 10 minutes after plugging-in the
UbiCell Plus
If the above suggestions did not correct the problem, or you encounter a problem that is not listed here,
you can get additional assistance by calling Samsung customer service.
Solution
- The internal GPS antenna is either unable to obtain or
having difficulty obtaining a GPS signal.
- Move the UbiCell Plus a location with fewer surrounding
obstructions. The new location should be in a more open
area and closer to a window, if possible.
- If relocation does not resolve the issue, detach the GPS
antenna from the UbiCell Plus to use it as an external GPS
antenna.
- Make sure the power is properly configured and securely
connected to the rear of the UbiCell Plus.
- If the preceding fails, remove the power cord from the wall
outlet, and then remove the power supply connector from
PWR connector at the rear of the UbiCell Plus for at least 10
seconds.
- Reconnect the power supply connector to the PWR
connector, plug the power cord into the wall outlet.
This allows the UbiCell Plus to initiate its startup sequence
where it detects the Ethernet connection, GPS signal,
and communication with the system.
27
UbiCell Plus User Guide _