Measurement labels, with alarms off symbol where appropriate
Current alarm limits
Graphic view of current yellow and red alarm limits and currently monitored measurement value.
indicates the measurement is switched off
You can use the pop-up keys that open with the
All Al. On
All Lim. Narrow
printer or recorder.
These pop-up keys are not available in the window for changing individual alarm limits which you
access by selecting the measurement label in the
Changing Alarm Limits
To change individual measurement alarm limits using the measurement's Setup Menu,
In the measurement's setup menu, select the alarm limit you want to change. This calls up a list of
available values for the alarm limit.
Select a value from the list to adjust the alarm limit.
Alternatively, you can use the keys in the measurement alarm limits window, which you access by
selecting the measurement label in the
Show ST Limits
to expand the list of ST leads and view the currently set alarm limits.
Hide ST Limits
hides the list again.
All Al. Off
All Lim. Wide
to set narrow or wide alarm AutoLimits for all measurements.
to print a list of all current alarm limit settings on a connected
window to perform common tasks: