Your monitor comes with a set of pre-configured Screens, optimized for common monitoring
scenarios such as OR adult, or ICU neonatal. A Screen defines the overall selection, size and position
of waves, numerics and other elements on the monitor screen when you switch on. You can easily
switch between different Screens during monitoring. Screens do NOT affect alarm settings, patient
category and so forth.
When you switch from a complex to a less complex Screen layout, some measurements may not be
visible but are still monitored in the background. If you switch to a more complex Screen with, for
example, four invasive pressure waves but you have only two pressures connected to the monitor, the
"missing" two pressures are either left blank or the available space is filled by another measurement.
Switching to a Different Screen
To switch to a different Screen, select the current Screen name in the monitor info line, or select
Choose the new Screen from the pop-up list.
Changing a Screen's Content
If you do not want to change the entire Screen content, but only some parts of it, you can substitute
individual waves, numerics, high-res waves, or trends. Be aware that these changes cannot be stored
permanently in Monitoring Mode.
To change the selection of elements on a Screen,
Select the element you want to change.
From the menu that appears, select
then select the wave or numeric you want, or select the high-resolution trend wave you want from
the list of available waves.
If you do not see
the numeric beside its wave. Changing the wave will automatically change the numeric.
The changed Screen is shown with an asterisk in the monitor info line.
with an asterisk.
Up to three modified Screens can be accessed via the
To recall Screens, either
select the name of the Screen in the
use the previous/next arrows at the top of the
the Screen history. The ten most recently-used Screens including up to three modified Screens can
After a patient discharge, the monitor's default Screen is shown. Modified Screens are still available in
in the menu, this Screen may be configured to always display
menu, the changed Screen is shown linked to the original Screen and marked
menu to move back and forth in