Using the Remote Control
The remote control provides you with direct access to five hard keys, a navigation knob and a numeric
Silence - acknowledges all active alarms by switching off audible alarm indicators and lamps.
Behavior follows the Silence permanent key configuration.
Alarms Off/Pause Alarms- pauses alarm indicators. Behavior follows the Pause Alarms
permanent key configuration.
Main Screen - close all open menus and windows and return to the main screen.
SmartKeys - display a block of SmartKeys specially configured for remote tasks (see below)
Back - go back one step to the previous menu.
Type numeric data on the keypad and press the Enter key to enter the data on the monitor.
Rotate the knob to highlight screen elements, then press to select the highlighted element.
The remote control can be used with a USB cable connection to the monitor or without a cable using
short range radio. When used without a cable, the remote control must be assigned to the monitor.
The assignment is made in Configuration mode.
When using a remote control without a cable, it is important that the user knows which remote control
is assigned to which monitor. Use the tethering cable delivered with the remote control to attach it to a
bed rail or IV pole, or label the remote control with the bed or monitor ID.