Using the Touchscreen
Select screen elements by pressing them directly on the monitor's screen.
Disabling Touchscreen Operation
To temporarily disable touchscreen operation of the monitor, press and hold the
permanent key. A padlock will appear on the
Press and hold the
Using a Mouse or Trackball
If you are using a mouse or trackball, select screen elements by clicking on them (press and release the
left mouse button). While you are moving the mouse, a cursor appears and a highlight shows your
You can move windows and menus using the Touchscreen or a mouse. To move a window,
Select the title of the window and keep your finger on the title, or the mouse button pressed.
Move your finger on the Touchscreen, or move the mouse, to move the window.
Take your finger off the screen, or release the mouse button, to place the window in the final
The new position is only active until the window or menu is closed. Not all locations on the screen can
be a target position, a window cannot overlap the monitor info line, the alarms and INOPs or the
The monitor has four different types of keys:
A permanent key is a graphical key that remains on the screen all the time to give you fast access to
permanent key again to re-enable the touchscreen operation.
- pauses alarm indicators. Pause duration depends on monitor
configuration. If pause duration is infinite, this key is labeled
Select again to immediately re-enable alarm indicators.
- acknowledges all active alarms by switching off audible alarm indicators
- close all open menus and windows and return to the main screen.
- enter main setup menu.