Mitsubishi Electric FR-E700 Installation Manuallines page 25

PARAMETER LIST
Pr. Name
991 PU contrast adjustment
Pr.CL Parameter clear
ALLC All parameter clear
Er.CL Faults history clear
Pr.CH Initial value change list

Differ according to capacities.
6%: FR-E740-026SC or lower, FR-E720S-050SC or lower
4%: FR-E740-040SC to 095SC, FR-E720S-080SC and 110SC
3%: FR-E740-120SC and 170SC
2%: FR-E740-230SC and 300SC

Differ according to capacities.
5s: FR-E740-095SC or lower, FR-E720S-008SC to 110SC
10s: FR-E740-120SC and 170SC
15s: FR-E740-230SC and 300SC

Differ according to capacities.
6%: FR-E720S-008SC and 015SC
4%: FR-E740-016SC to 170SC, FR-E720S-030SC to 110SC
2%: FR-E740-230SC and 300SC

The range differs according to the Pr. 71 setting.

The parameter number in parentheses is the one for use with the
parameter unit (FR-PU04/FR-PU07).

The initial value differs according to the voltage class. (200V class/400V
class)

Available only for the three-phase power input specification model.

This setting is active only during the communication operation.
22
Initial
Setting Range
Value
0 to 63 58
0, 1 0
0, 1 0
0, 1 0
— —