MAINTENANCE
Steering System
Rail Slide
n
Measure slide thickness at
several points along the
rail. Have your dealer
replace the slide when it's
worn down to the top of
the wear groove ( ). Do
not operate the snowmobile if
slide thickness measures less
than 7/16" (1.1 cm).
Suspension Maintenance
Pre-Ride Suspension Inspection
n
Loose nuts and bolts can reduce your snowmobile's reliability and
cause needless repairs and down time. Before beginning any
snowmobile trip, a visual inspection will uncover potential problems.
Check the following items on a weekly basis or before any long trip:
n Check suspension mounting bolts for tightness.
n Check rear idler wheel bolts for tightness. See page 99.
n Check rear idler adjusting bolt locknuts for tightness.
n Check front torque arm limiter strap condition.
n Check slide rail condition. See page 104.
n Check track tension. See page 99.
n Lubricate all rear suspension components. See page 74.
n Check ski runner/skag condition.
n Check ski spindle bolts for tightness.
n Check tie rod end nuts for tightness.
104
7/16"
(1.1 cm)