Spark Plugs - Polaris 340 Touring Owner's Manual

Polaris 2007 snowmobile owner's manual
Table of Contents

Advertisement

Spark Plugs

A new engine can cause temporary spark plug fouling due to the preser-
vative added during the assembly process. Avoid prolonged idle speeds,
which cause plug fouling and carbonization. Refer to your Owner's
Manual Supplement for the specific spark plug to be used in your
machine.
Using non-recommended spark plugs can result in serious engine damage. A
spark plug with a heat range too high will always cause engine damage if the
engine is operated in conditions more severe than intended for that plug.
Always use the spark plugs recommended for your snowmobile. See your
Owner's Manual Supplement.
• Use recommended spark plugs with the proper gap.
• Torque spark plugs to 18-22 ft. lbs. (24-30 Nm).
• Always carry spare spark plugs.
Spark plug condition is indicative of engine operation. The spark plug
firing end condition should be read after the engine has been warmed up
and the vehicle has been driven at higher speeds. Immediately check the
spark plug for correct color.
A hot exhaust system and engine can cause serious burns. Wear protective
gloves when removing a spark plug for inspection.
NOTE: Incorrect fuel mixture can often cause a spark plug to appear
too dark or too light in color. Before changing spark plug heat
ranges, be sure the correct main jet is installed in the carbure-
tor(s). Refer to the Owner's Manual Supplement or see your
dealer.
CAUTION
WARNING
MAINTENANCE
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents