Parameters/Address Space; Parameters - Siemens SIMATIC Manual

Parameters/address space

4.1

Parameters

DI 8×24VDC SRC BA parameters
Specify the module properties with the various parameters in the course of your STEP 7
configuration. The following table lists the configurable parameters. The effective range of
the configurable parameters depends on the type of configuration.
The following configurations are possible:
● Central operation with an ET 200SP CPU
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation with PROFIBUS DP in an ET 200SP system
When assigning parameters in the user program, use the "WRREC" instruction to transfer
the parameters to the module by means of data records (see chapter Parameter assignment
and structure of the parameter data record (Page 28)).
Table 4- 1 Configurable parameters and their defaults (GSD file)
Parameter
Diagnostics
No supply voltage L+
Channel activated
Digital output module DI 8x24VDC SRC BA (6ES7131-6BF61-0AA0)
Manual, 09/2017, A5E32855511-AC
Value range
Disable
•
Enable
•
Disable
•
Enable
•
Default Reconfig-
uration in
RUN
Disable Yes
Enable Yes
Scope with configuration software,
e.g. STEP 7 (TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Module Module
Channel Channel
4
1
17