Table of Contents
Advertisement
Quick Links
The Polar Speed Sensor W.I.N.D. is designed to
measure speed and distance when cycling. No
other use is intended or implied.
Please follow the pictures on the front cover.
Product Elements
1.
Polar Bike Mount and Cycling Computer
(picture 1 A)
2.
Polar Speed Sensor, rubber part and spoke
magnet (picture 1 B)
Installing the Polar Bike Mount and Cycling
Computer
You can install the bike mount and the cycling
computer on the left or right side of the
handlebar or on the stem.
1.
Place the rubber part on the handlebar or
stem and insert the bike mount on top of it
(picture 2).
2.
Pass the cable ties over the bike mount and
adjust them around the handlebar/stem.
Secure the bike mount firmly. Cut off any
excess cable tie ends (picture 2).
3.
Position the cycling computer on to the
bike mount. Turn the cycling computer
clockwise until you hear a click. You can
release the cycling computer by pressing it
down and simultaneously turning it counter
clockwise.
Installing the Polar Speed Sensor
To install the speed sensor and spoke magnet,
you will need cutters and a cross-head
screwdriver.
1.
It is recommended to install the speed
sensor on the front fork (as in picture 1) of
your bicycle. Do not install the speed
sensor on the seat stay if the (optional)
power sensor is mounted.
E N G L I S H
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Polar Electro Cycling Computer
- Page 1 The Polar Speed Sensor W.I.N.D. is designed to measure speed and distance when cycling. No other use is intended or implied. Please follow the pictures on the front cover. Product Elements Polar Bike Mount and Cycling Computer (picture 1 A)
- Page 2 (picture 3). Pass the cable ties over the speed sensor and rubber part (picture 4). Adjust the sensor to the front fork so that the POLAR logo faces outwards. Adjust the ties loosely. Do not tighten them fully yet. Attach the magnet to a spoke at the same level as the speed sensor.
- Page 3 Speed Sensor Teaching The cycling computer has to be coded to the Speed Sensor i.e. taught to receive speed and distance data. This enables exercising in a group without interference from other sensors. The cycling computer and sensor that come...
- Page 4 LIGHT button and selecting Seek sensor • Make sure the position and distance of the sensor to the magnet are appropriate. • Check that you have activated the speed function in the cycling computer. For further information, see Speed Sensor Teaching.
- Page 5 • If the 0.0 reading appears irregularly, this may be due to temporary electromagnetic interference in your current surroundings. • If the 0.0 reading is constant, you may have exceeded 3000 riding hours and the battery is empty. … Check speed is displayed? •...
- Page 6 Polar Electro Inc. for consumers who have purchased this product in the USA or Canada. This limited Polar international guarantee is issued by Polar Electro Oy for consumers who have purchased this product in other countries. • Polar Electro Inc./Polar Electro Oy...
- Page 7 Copyright © 2007 Polar Electro Oy, FIN-90440 KEMPELE, Finland. Polar Electro Oy is a ISO 9001:2000 certified company. All rights reserved. No part of this manual may be used or reproduced in any form or by any means without prior written permission of Polar Electro Oy.
- Page 8 Polar Electro Inc./Polar Electro Oy shall not be liable for any damages, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the use of this material or the products described herein.
Need help?
Do you have a question about the Cycling Computer and is the answer not in the manual?
Questions and answers