Hitachi WJ200-004M Quick Reference Manual page 12

Wj200 series
Hide thumbs Also See for WJ200-004M:
Table of Contents

Advertisement

Keys, Modes, and Parameters
The purpose of the keypad is to provide a way to
change modes and parameters. The term function
applies to both monitoring modes and parameters.
These are all accessible through function codes that are
primary 4-character codes. The various functions are
separated into related groups identifiable by the
left-most character, as the table shows.
Function
Group
"d"
"F"
"A"
"b"
"C"
"H"
"P"
"U"
"E"
You can see from the following page how to monitor and/or program the parameters.
Keypad Navigation Map
The WJ200 Series inverter drives have many programmable functions and parameters.
Chapter 3 will cover these in detail, but you need to access just a few items to perform the
powerup test. The menu structure makes use of function codes and parameter codes to
allow programming and monitoring with only a 4-digit display and keys and LEDs. So, it is
important to become familiar with the basic navigation map of parameters and functions in
the diagram below. You may later use this map as a reference.
Type (Category) of Function
Monitoring functions
Main profile parameters
Standard functions
Fine tuning functions
Intelligent terminal functions
Motor constant related functions
Pulse train input, torque, EzSQ, and
communication related functions
User selected parameters
Error codes
Mode to Access
Monitor
Program
Program
Program
Program
Program
Program
Program
11
RUN
PWR
8888
Hz
ALM
A
PRG
STOP/
RUN
1
RESET
ESC
2
SET
PRG LED
Indicator

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj200-007m

Table of Contents