GE L90 Instruction Manual page 184

5.2 PRODUCT SETUP
PATH: SETTINGS PRODUCT SETUP
MODBUS USER MAP
The Modbus user map provides read-only access for up to 256 registers. To obtain a memory map value, enter the desired
address in the
ADDRESS
played in the line. A value of "0" in subsequent register
VALUE
lines incremented by "1". An address value of "0" in the initial register means "none" and values of "0" will be dis-
ADDRESS
played for all registers. Different
PATH: SETTINGS PRODUCT SETUP
5
REAL TIME
CLOCK
5-38
MODBUS USER MAP
ADDRESS
VALUE:
ADDRESS
MESSAGE
VALUE:
ADDRESS
MESSAGE
VALUE:
ADDRESS 256:
MESSAGE
VALUE:
line (this value must be converted from hex to decimal format). The corresponding value is dis-
values can be entered as required in any of the register positions.
ADDRESS
REAL TIME CLOCK
IRIG-B SIGNAL TYPE:
None
REAL TIME CLOCK
MESSAGE
EVENTS: Disabled
LOCAL TIME OFFSET
MESSAGE
FROM UTC:
DAYLIGHT SAVINGS
MESSAGE
TIME: Disabled
DST START MONTH:
MESSAGE
April
DST START DAY:
MESSAGE
Sunday
DST START DAY
MESSAGE
INSTANCE: First
DST START HOUR:
MESSAGE
2:00
DST STOP MONTH:
MESSAGE
April
DST STOP DAY:
MESSAGE
Sunday
DST STOP DAY
MESSAGE
INSTANCE: First
DST STOP HOUR:
MESSAGE
2:00
L90 Line Current Differential System
Range: 0 to 65535 in steps of 1
1: 0
0
Range: 0 to 65535 in steps of 1
2: 0
0
Range: 0 to 65535 in steps of 1
3: 0
0
Range: 0 to 65535 in steps of 1
0
0
lines automatically returns values for the previous
ADDRESS
Range: None, DC Shift, Amplitude Modulated
Range: Disabled, Enabled
Range: –24.0 to 24.0 hrs in steps of 0.5
0.0 hrs
Range: Disabled, Enabled
Range: January to December (all months)
Range: Sunday to Saturday (all days of the week)
Range: First, Second, Third, Fourth, Last
Range: 0:00 to 23:00
Range: January to December (all months)
Range: Sunday to Saturday (all days of the week)
Range: First, Second, Third, Fourth, Last
Range: 0:00 to 23:00
5 SETTINGS
5.2.5 MODBUS USER MAP
5.2.6 REAL TIME CLOCK
GE Multilin