Download  Print this page

Choosing Easi Or Standard Lead Placement - Philips IntelliVue MX40 Instructions For Use Manual

Wearable patient monitor.
Hide thumbs

Advertisement

Choosing EASI or Standard Lead Placement

Choose either standard lead placement or EASI lead placement:
1
In the Setup ECG menu, select Lead Placement to toggle between
Standard or EASI.
2
Select Standard or EASI.
Note — When changing lead placement, the patient cable must be attached
to the MX40.
EASI is shown beside the 1 mV calibration bar on the ECG wave on the
display, and EASI is marked on any recorder strips and printouts.
See the sections on Lead Placement for electrode placement diagrams.
ECG and Arrhythmia Monitoring
5-13

Advertisement

Table of Contents

   Also See for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: