Download  Print this page

Philips IntelliVue MX40 Instructions For Use Manual Page 26

Wearable patient monitor.
Hide thumbs


Patient Information Area
Touching the Patient Information Area displays the following information:
Bed Label
Patient Name (up to 15 characters will display)
Paced Status (see Paced Status below)
Gender/Type (Male/Female and Adult/Pediatric)
MRN (Lifetime ID, Encounter ID)
Note —
printed reports. It will not display at the MX40.
Paced Status
Display Lock
Status Area
Basic Operation
If you use an alternative ID, it will display at the Information Center and on
The Lock symbol appears in the lower left of the display when
the MX40 is in a locked state after five minutes of non-use.
Locking the display provides additional protection against
accidental patient access. The display is unlocked using the
SmartKeys menu.
The status area of the MX40 displays short-range radio
connection (optional) and system wireless connection
status. You can also view battery strength for the type
of battery used in the device, AA or rechargeable
1. Pacing algorithm is on.
2. Pacing algorithm is off.


Table of Contents

   Also See for Philips IntelliVue MX40

   Related Manuals for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: