Download  Print this page

Mx40 2.4ghz Wlan Radio; Ism Radio - Philips IntelliVue MX40 Instructions For Use Manual

Wearable patient monitor.
Hide thumbs

Advertisement

MX40 2.4GHz WLAN Radio

C.
The MX40 2.4GHz WLAN Radio conforms to the 802.11 b/g standard,
operating in the 2.4GHz ISM band.
The Radio characteristics are defined below.

ISM Radio

FCC and Industry Canada Radio Compliance: This device complies with
Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any
changes or modifications to this equipment not expressly approved by
Philips Medical Systems may cause harmful radio frequency interference
and void your authority to operate this equipment.
WLAN Radio RF Specs
802.11b
Frequency Range
Transmitter Power
Spectrum Mans (relative to
max power spectral density)
Modulation Type
802.11g
Frequency Range
Transmitter Power
Spectrum Mans (relative to
max power spectral density)
Modulation Type
Specification
2.4 to 2.483GHz
14 to 17 dBm into antenna
load
<-30 dBr @ +/-11MHz offset
<-50 dBr @ +/-22MHz offset
CCK modulation
2.4 to 2.483GHz
12 to 15 dBm into antenna
load
<-20 dBr @ +/-11MHz offset
<-28 dBr @ +/-20MHz offset
<-40 dBr @ +/-30MHz offset
OFDM modulation
MX40 2.4GHz WLAN Radio
C-1

Advertisement

Table of Contents

   Also See for Philips IntelliVue MX40

Comments to this Manuals

Symbols: 0
Latest comments: