Overview - Cisco Nexus 93180YC-FX Hardware Installation Manual

Overview

•
Overview
The Cisco Nexus 93180YC-FX switch (N9K-C93180YC-FX) is a 1-RU, fixed-port switch designed for
Top-of-Rack (TOR), Middle-of-Rack (MoR), and End-of-Rack (EoR) deployment in data centers. This switch
has 48 10/25-Gigabit SFP+ downlink ports that support 1-Gigabit, 10-Gigabit, and 25-Gigabit Ethernet
connections and 8-, 16-, and 32-Gigabit Fibre Channel connections, and it has six fixed 40/100-Gigabit
QSFP28 uplink ports that support combinations of 10-, 25-, 40-, 50-, and 100-Gigabit connectivity. You can
set the downlink port speeds on a port-by-port basis. The chassis for this switch includes the following
user-replaceable components:
• Fan modules (four) with the following airflow choices:
• Power supply modules (two—one for operations and one for redundancy [1+1]) with the following
Overview, page 1
◦ Port-side intake airflow with burgundy coloring (NXA-FAN-30CFM-B)
◦ Port-side exhaust airflow with blue coloring (NXA-FAN-30CFM-F)
choices:
◦ 500-W AC power supply with port-side exhaust airflow (blue coloring) (NXA-PAC-500W-PE)
◦ 500-W AC power supply with port-side intake airflow (burgundy coloring) (NXA-PAC-500W-PI)
◦ 1200-W HVAC/HVDC power supply with dual-direction airflow (white coloring)
(N9K-PUV-1200W)
◦ 930-W DC power supply with port-side exhaust airflow (blue coloring) (NXA-PDC-930W-PE)
◦ 930-W DC power supply with port-side intake airflow (burgundy coloring) (NXA-PDC-930W-PI)
Note Both power supplies should use the same type of power source. Do not mix AC and DC
power sources.
C H A P T E R
Cisco Nexus 93180YC-FX NX-OS Mode Switch Hardware Installation Guide
1
1