Phone Number Preset - Kenwood DNX9960 Instruction Manual
Gps navigation system
dnx series; monitor with dvd receiver
ddx series
Hide thumbs
Also See for DNX9960:
- Instruction manual (196 pages) ,
- Gps navigation instruction manual (84 pages) ,
- Installation manual (33 pages)
Table of Contents
Advertisement
Hands Free Unit Control
4
Display voice registration screen
5
Say the voice to register (1st try)
Say within 2 seconds after the Beep.
6
Say the voice to register (2nd try)
Say within 2 seconds after the Beep.
7
End voice registration
⁄
• A message is displayed if the voice is not
recognized. Read the message for the further
operation.
• Repeat from 1st try if the voice is different from
the 1st try.
68
DNX series DNX9960/ DNX7160/ DNX7020EX
Phone Number Preset
Phone Number Preset
Registers frequently used phone number
to Hands Free control screen preset button.
1
Display the Hands-Free Control
screen
See <Making a Call> (page 60).
2
Select the Preset number to register
2 sec.
⁄
• If no Preset number is registered, pressing
this button momentarily moves to the
step 3.
3
Select the search destination of the
number to register
[
] Registers from SMS received
message list.
[
] Registers from SMS sent message
list.
[
] Registers from Phonebook.
[
] Registers from outgoing calls list.
[
] Registers from incoming calls list.
[
] Registers from missed calls list.
[Direct Number] Registers by entering
phone numbers.
[Voice] Registers voice for voice
recognition to preset number. (DNX7/
DDX8 series only)
[Memory] Registers the currently
displayed phone number.
[Delete] Deletes the currently displayed
phone number. Touch to display the
confirmation screen. Touch [Yes] to
delete or [No] to cancel.
4
Search phone number to register
with each function
5
Register phone number
SMS (Short Message Service)
SMS (Short Message Service)
Uses SMS function.
1
Display the Hands-Free Control
screen
See <Making a Call> (page 60).
2
Display the SMS Select screen
DDX series DDX896/ DDX8046BT
3
Select a function
[
] Displays the SMS Create Menu
screen. See <Create a message>.
[
] Displays received message list.
[
] Displays sent message list.
[
] Displays the SMS Create Menu
screen. See <Create a message>.
The button will be active when any
message has been created after power-
on.
[Download] Retrieves SMS messages
from the cell-phone.
4
Select a message to display
1
1
1
1 Calls the number in the selected
message.
[DISP] Displays the selected message.
[Read] Reads out the selected message.
(DNX9960 only)
Next page 3
Next page 3
English
69
Advertisement
Table of Contents
