Direct Search; Itunes Tagging - Kenwood DNX9960 Instruction Manual

Gps navigation system dnx series; monitor with dvd receiver ddx series
Hide thumbs Also See for DNX9960:
Table of Contents

Advertisement

HD Radio™ Control

Direct Search

Direct Search
Tuning by entering the desired frequency
or channel number.
Only with KTC-HR300 (optional accessory)
connected.
1
Display the Source Control Screen
See <Source Control Screen> (page 49).
2
Start Direct Search
3
Enter the frequency or channel
number
1
1
1
1 Enters the frequency or channel
number.
[Mode] Switches the search mode to
Frequency or Channel.
[Cancel] Cancels the direct search.
[Clear] Clears the frequency or channel
number.
4
Tune in the frequency or channel
52
DNX series DNX9960/ DNX7160/ DNX7020EX

iTunes Tagging

iTunes Tagging
Using an iTunes Tagging enabled HD Radio
receiver you can tag your music. When
you hear a song you enjoy on your local
HD Radio station, you only have to press
the [ATT] button for at least 1 second. The
song's information will then be saved on
this unit. The saved songs will then show
up in a playlist called "Purchased" in iTunes
the very next time you sync your iPod to
your computer. So then you just need to
click and then easily buy and download
the song you were tagging directly from
the Apple iTunes Music Store.
Only with KTC-HR300 (optional accessory)
connected.
Registers a tag
1 sec.
"TAG" will be indicated on the display
when song information can be
registered.
The memory usage can be checked
1
Display the Source Control Screen
See <Source Control Screen> (page 49).
2
Display the Information Screen
3
The memory usage can be checked
Select the "Tagging Information" display.
• Up to 50 TAGs (song's information) can be
registered to this unit. When iPod is connected,
the TAG information registered to this unit is
transferred to the connected iPod.
DDX series DDX896/ DDX8046BT
English
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dnx7160Dnx7020exDdx8046btDdx896

Table of Contents