Re-Fitting Enclosure - mcmurdo 406 EPIRB User Manual

5.8.2. Re-fitting enclosure

• Offer EPIRB into backplate with switches facing outwards.
• Engage base of EPIRB into D shaped metal prongs.
• Antenna rests either to left or right of release pin.
• Check EPIRB is fully engaged in metal prongs and resting on foam pad.
• Refit cover by first locating release pin through hole in cover.
• Locate cover onto backplate, then snap down over locating lug.
• Refit R-clip through hole in end of release pin.
12