Download Print this page

Kenwood TK-8180H-K Instruction Manual

Hide thumbs Also See for TK-8180H-K:

Advertisement

Quick Links

KENWOOD CORPORATION
INSTRUCTION MANUAL
THANK YOU!
We are grateful you chose KENWOOD
transceiver will provide dependable communications to keep personnel operating at peak efficiency.
KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will
KENWOOD
KENWOOD
KENWOOD
be pleased with the quality and features of this product.
MODELS COVERED BY THIS MANUAL
MODELS COVERED BY THIS MANUAL
MODELS COVERED BY THIS MANUAL
MODELS COVERED BY THIS MANUAL
The models listed below are covered by this
•TK- 7180H: VHF FM Transceiver
•TK- 8180H : UHF FM Transceiver
NOTICES TO THE USER
WARNING:
• GOVERNMENT LAW PROHIBITS THE OPERATION OF UNLICENSED RADIO TRANSMITTERS WITHIN THE
TERRITORIES UNDER GOVERNMENT CONTROL.
ILLEGAL OPERATION IS PUNISHABLE BY FINE AND /OR INPRISONMENT.
• REFER SERVICE TO QUALIFIED TECHNICIANS ONLY.
SAFETY:
It is important that the operator is aware of, and understands, hazards common to the operation of any
transceiver.
WARNING:
EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.)
Turn off your transceiver while taking on fuel, or while parked in gasoline service stations. Do not carry spare
fuel containers in the trunk of your vehicle if your transceiver is mounted in the trunk area.
INJURY FROM RADIO FREQUENCY TRANSMISSIONS
Do not operate your transceiver when somebody is either touching the antenna or standing within two to three
feet of it, to avoid the possibility of radio frequency burns or related physical injury.
DYNAMITE BLASTING CAPS
Operating the transceiver within 500 feet (150m) of dynamite blasting caps may cause them to explode.
Turn OFF your transceiver when in an area where blasting is in progress, or where "TURN OFF
RADIO" sighs have been posted. If you are transporting blasting caps in your vehicle, make sure they are
carried in a closed metal box with a padded interior. Do not transmit while the caps are being placed into or
removed from the container.
PRECAUTIONS
Please observe the following precautions to prevent fire, personal injury, and transceiver damage.
• Do not attempt to configure the transceiver while driving , it is too dangerous.
• Do not modify the transceiver for any reason.
• Do not expose the transceiver to long periods of direct sunlight, nor place it near heating appliances.
• Do not place the transceiver in excessively dusty, humid , or wet areas, nor on unstable surfaces.
• If an abnormal odor or smoke is detected coming from the transceiver, turn OFF the power immediately.
Contact your KENWOOD
KENWOOD dealer.
KENWOOD
KENWOOD
FCC WARNING
This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause
harmful interference unless the modifications are expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized change or modification is made.
KENWOOD
KENWOOD for your land mobile radio applications. We believe this easy-to-use
KENWOOD
TK-7180H-K FCC ID: K4437303210
TK-8180H-K FCC ID: K4437313210
TK-8180H-K2 FCC ID: K4437313220
TWO-WAY

Advertisement

loading

Summary of Contents for Kenwood TK-8180H-K

  • Page 1 KENWOOD KENWOOD KENWOOD KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. MODELS COVERED BY THIS MANUAL MODELS COVERED BY THIS MANUAL...
  • Page 2: Unpacking And Checking Equipment

    If your vehicle contains such equipment, consult the dealer for the make of vehicle and enlist his/her aid in determining if they will perform while transmitting. Note Note: The following preparation instructions are for use by your KENWOOD KENWOOD dealer,an authorized KENWOOD KENWOOD Note...
  • Page 3: Tools Required

    KENWOOD CORPORATION TK-7180H-K FCC ID: K4437303210 TK-8180H-K FCC ID: K4437313210 TK-8180H-K2 FCC ID: K4437313220 TOOLS REQUIRED Note Note Note Note: Before installing the transceiver, always check how far the mounting screws will extend below the mounting Surface. When drilling mounting holes, be careful not to damage vehicle wiring or parts.
  • Page 4 KENWOOD CORPORATION TK-7180H-K FCC ID: K4437303210 TK-8180H-K FCC ID: K4437313210 TK-8180H-K2 FCC ID: K4437313220 ORIENTATION Power Volume None Moni None Channel Anten Power supply Audio output Functional and Operational specifications 1) Front Panel Switch(Push type) Name Description DC Source Power On/Off...
  • Page 5: Operating Basics

    KENWOOD CORPORATION TK-7180H-K FCC ID: K4437303210 TK-8180H-K FCC ID: K4437313210 TK-8180H-K2 FCC ID: K4437313220 3) DISPLAY LCD Name Description Dot Matrix(12digits) Alphanumeric display Channel/GID display Zone display Dot Matrix(3digits) Channel/GID display Zone display OST list number display Signal strength indicator...
  • Page 6: Auxiliary Features

    KENWOOD CORPORATION TK-7180H-K FCC ID: K4437303210 TK-8180H-K FCC ID: K4437313210 TK-8180H-K2 FCC ID: K4437313220 • Receiving 1 Select your desired channel. 2 When you hear a signal, readjust the volume level if necessary. 3 Respond to the call as described in step 2 of “TRANSMITTING”,above.
  • Page 7: Mandatory Safety Instructions To Installers And Users

    MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS AND USERS • Use only manufacturer or dealer supplied antenna. • Antenna Minimum Safe Distance: 120 cm (4 feet), 50% duty Cycle. • Antenna Gain: 0 dBd referenced to a dipole. The Federal Communications Commission has adopted a safety standard for human exposure to RF (Radio Frequency) energy which is below the OSHA (Occupational Safety and Health Act) limits.

This manual is also suitable for:

Tk-8180h-k2Tk-7180h-k