These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully read
through the following instructions. Use extreme care when cutting headliner material.
Check for wiring or other componentry above headliner material. Cut only where indicated.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver
3. T-15 TORX bit driver
5. T-45 TORX bit driver
7. Awl or similar tool
9. Audiovox Series 645/655 Video Module
INSTALLATION INSTRUCTION # 44-0022B
KEMCO
INSTALLATION INSTRUCTIONS
FOR
50-0230B-002
50-0230B-003
50-0230B-004
SUBURBAN
Overhead console with flip down TV
2. Powered screwdriver or drill with adapter
4. Razor knife or similar
6. 1/4" hex socket bit
8. 3/32" Drill bit
May 26, 1999
Printed in the U.S.A.