Step Summary - 3Com 3CRWX120695A User Manual

Table 11 Creating a Service for Guest Access
Task Path
"Set Up VLANs Expand the WX switch icon in the
on WX Organizer panel, right-click VLANs >
Switches" on Insert > VLAN
page 66
"Optional: Expand the WX switch icon in the
Configure Organizer panel, right-click on a WX
Mobility Profiles" switch; select Edit. Click AAA >
on page 73 Mobility Profile.

Step Summary

The following list summarizes the fields selected or configuration items
entered configure Guest access.
1 Create a service profile.
From the Service Profile wizard, enter "GuestsSrvcProf" as the Name
of the service profile and "Guests" as the SSID.
Select SSID Type Clear. Select Beacon. Select the Fall Through
Authentication as "Web Portal".
2 Create a radio profile.
From the Radio Profile wizard, enter the name of the radio profile.
Select Service Profile Selection. Select the Guests service profile.
Click Add. Click Finish.
Configure Guest Access Services
Primary Parameters to Configure
Setup guest VLAN on an WX switch that can access the
external DMZ subnet.
1 From VLAN Setup tab:
VLAN ID: select number (must be unique)
VLAN Name: enter name (must be unique)
IP Address: enter IP Address
2 From VLAN Member Selection tab:
Available Members: select port(s) that connect to the
DMZ; click Add
3 From Spanning Tree tab:
Select STP options
4 From Spanning Tree Port Setup tab:
Select STP port options
Click Finish
1 Click New Mobility Profile:
Enter a Profile Name
Enter: selected
Select the Ports or Distributed MAPs
Click Finish
71